IPSET

NAME

SYNOPSIS

COMMANDS := { create | add | del | test | destroy | list | save | restore | flush | rename | swap | help | version | - }

OPTIONS := { -exist | -output { plain | save | xml } | -quiet | -resolve | -sorted | -name | -terse }

ipset create SETNAME TYPENAME [ CREATE-OPTIONS ]

ipset add SETNAME ADD-ENTRY [ ADD-OPTIONS ]

ipset del SETNAME DEL-ENTRY [ DEL-OPTIONS ]

ipset test SETNAME TEST-ENTRY [ TEST-OPTIONS ]

ipset destroy [ SETNAME ]

ipset list [ SETNAME ]

ipset save [ SETNAME ]

ipset restore

ipset flush [ SETNAME ]

ipset rename SETNAME-FROM SETNAME-TO

ipset swap SETNAME-FROM SETNAME-TO

ipset help [ TYPENAME ]

ipset version

ipset -  

DESCRIPTION

Iptables matches and targets referring to sets create references, which protect the given sets in the kernel. A set cannot be destroyed while there is a single reference pointing to it.  

OPTIONS

COMMANDS

n, create SETNAME TYPENAME [ CREATE-OPTIONS ]

Create a set identified with setname and specified type. The type may require type specific options. If the -exist option is specified, ipset ignores the error otherwise raised when the same set (setname and create parameters are identical) already exists.

add SETNAME ADD-ENTRY [ ADD-OPTIONS ]

Add a given entry to the set. If the -exist option is specified, ipset ignores if the entry already added to the set.

del SETNAME DEL-ENTRY [ DEL-OPTIONS ]

Delete an entry from a set. If the -exist option is specified, ipset ignores if the entry does not added to (already expired from) the set.

test SETNAME TEST-ENTRY [ TEST-OPTIONS ]

Test wether an entry is in a set or not. Exit status number is zero if the tested entry is in the set and nonzero if it is missing from the set.

x, destroy [ SETNAME ]

Destroy the specified set or all the sets if none is given.

If the set has got reference(s), nothing is done and no set destroyed.

list [ SETNAME ] [ OPTIONS ]

List the header data and the entries for the specified set, or for all sets if none is given. The -resolve option can be used to force name lookups (which may be slow). When the -sorted option is given, the entries are listed sorted (if the given set type supports the operation). The option -output can be used to control the format of the listing: plain, save or xml. (The default is plain.) If the option -name is specified, just the names of the existing sets are listed. If the option -terse is specified, just the set names and headers are listed.

save [ SETNAME ]

Save the given set, or all sets if none is given to stdout in a format that restore can read.

restore

Restore a saved session generated by save. The saved session can be fed from stdin.

flush [ SETNAME ]

Flush all entries from the specified set or flush all sets if none is given.

e, rename SETNAME-FROM SETNAME-TO

Rename a set. Set identified by SETNAME-TO must not exist.

w, swap SETNAME-FROM SETNAME-TO

Swap the content of two sets, or in another words, exchange the name of two sets. The referred sets must exist and identical type of sets can be swapped only.

help [ TYPENAME ]

Print help and set type specific help if TYPENAME is specified.

version

Print program version.

-

If a dash is specified as command, then ipset enters a simple interactive mode and the commands are read from the standard input. The interactive mode can be finished by entering the pseudo-command quit.

OTHER OPTIONS

-!, -exist

Ignore errors when the exactly the same set is to be created or already added entry is added or missing entry is deleted.

-o, -output { plain | save | xml }

Select the output format to the list command.

-q, -quiet

Suppress any output to stdout and stderr. ipset will still exit with error if it cannot continue.

-r, -resolve

When listing sets, enforce name lookup. The program will try to display the IP entries resolved to host names which requires slow DNS lookups.

-s, -sorted

Sorted output. When listing sets entries are listed sorted. Not supported yet.

-n, -name

List just the names of the existing sets, i.e. suppress listing of set headers and members.

-t, -terse

List the set names and headers, i.e. suppress listing of set members.

SET TYPES

TYPENAME := method:datatype[,datatype[,datatype]]

where the current list of the methods are bitmap, hash, and list and the possible data types are ip, net, mac, port and iface. The dimension of a set is equal to the number of data types in its type name.

When adding, deleting or testing entries in a set, the same comma separated data syntax must be used for the entry parameter of the commands, i.e

ipset add foo ipaddr,portnum,ipaddr

The bitmap and list types use a fixed sized storage. The hash types use a hash to store the elements. In order to avoid clashes in the hash, a limited number of chaining, and if that is exhausted, the doubling of the hash size is performed when adding entries by the ipset command. When entries added by the SET target of iptables/ip6tables, then the hash size is fixed and the set won't be duplicated, even if the new entry cannot be added to the set.

All set types support the optional

timeout value

parameter when creating a set and adding entries. The value of the timeout parameter for the create command means the default timeout value (in seconds) for new entries. If a set is created with timeout support, then the same timeout option can be used to specify non-default timeout values when adding entries. Zero timeout value means the entry is added permanent to the set. The timeout value of already added elements can be changed by readding the element using the -exist option.

The hash set types which can store net type of data (i.e. hash:*net*) support the optional

nomatch

option when adding entries. When matching elements in the set, entries marked as nomatch are skipped as if those were no added to the set, which makes possible to build up sets with exceptions. See the example at hash type hash:net below.

If host names or service names with dash in the name are used instead of IP addresses or service numbers, then the host name or service name must be enclosed in square brackets. Example:

ipset add foo [test-hostname],[ftp-data]

bitmap:ip

CREATE-OPTIONS := range fromip-toip|ip/cidr [ netmask cidr ] [ timeout value ]

ADD-ENTRY := { ip | fromip-toip | ip/cidr }

ADD-OPTIONS := [ timeout value ]

DEL-ENTRY := { ip | fromip-toip | ip/cidr }

TEST-ENTRY := ip

Mandatory create options:

range fromip-toip|ip/cidr

Create the set from the specified inclusive address range expressed in an IPv4 address range or network. The size of the range (in entries) cannot exceed the limit of maximum 65536 elements.

Optional create options:

netmask cidr

When the optional netmask parameter specified, network addresses will be stored in the set instead of IP host addresses. The cidr prefix value must be between 1-32. An IP address will be in the set if the network address, which is resulted by masking the address with the specified netmask calculated from the prefix, can be found in the set.

The bitmap:ip type supports adding or deleting multiple entries in one command.

Examples:

ipset create foo bitmap:ip range 192.168.0.0/16

ipset add foo 192.168.1/24

ipset test foo 192.168.1.1

bitmap:ip,mac

CREATE-OPTIONS := range fromip-toip|ip/cidr [ timeout value ]

ADD-ENTRY := ip[,macaddr]

ADD-OPTIONS := [ timeout value ]

DEL-ENTRY := ip[,macaddr]

TEST-ENTRY := ip[,macaddr]

Mandatory options to use when creating a bitmap:ip,mac type of set:

range fromip-toip|ip/cidr

Create the set from the specified inclusive address range expressed in an IPv4 address range or network. The size of the range cannot exceed the limit of maximum 65536 entries.

The bitmap:ip,mac type is exceptional in the sense that the MAC part can be left out when adding/deleting/testing entries in the set. If we add an entry without the MAC address specified, then when the first time the entry is matched by the kernel, it will automatically fill out the missing MAC address with the source MAC address from the packet. If the entry was specified with a timeout value, the timer starts off when the IP and MAC address pair is complete.

The bitmap:ip,mac type of sets require two src/dst parameters of the set match and SET target netfilter kernel modules and the second one must be src to match, add or delete entries because the set match and SET target have access to the source MAC address only.

Examples:

ipset create foo bitmap:ip,mac range 192.168.0.0/16

ipset add foo 192.168.1.1,12:34:56:78:9A:BC

ipset test foo 192.168.1.1

bitmap:port

CREATE-OPTIONS := range fromport-toport [ timeout value ]

ADD-ENTRY := { port | fromport-toport }

ADD-OPTIONS := [ timeout value ]

DEL-ENTRY := { port | fromport-toport }

TEST-ENTRY := port

Mandatory options to use when creating a bitmap:port type of set:

range fromport-toport

Create the set from the specified inclusive port range.

The set match and SET target netfilter kernel modules interpret the stored numbers as TCP or UDP port numbers.

Examples:

ipset create foo bitmap:port range 0-1024

ipset add foo 80

ipset test foo 80

hash:ip

CREATE-OPTIONS := [ family { inet | inet6 } ] | [ hashsize value ] [ maxelem value ] [ netmask cidr ] [ timeout value ]

ADD-ENTRY := ipaddr

ADD-OPTIONS := [ timeout value ]

DEL-ENTRY := ipaddr

TEST-ENTRY := ipaddr

Optional create options:

family { inet | inet6 }

The protocol family of the IP addresses to be stored in the set. The default is inet, i.e IPv4.

hashsize value

The initial hash size for the set, default is 1024. The hash size must be a power of two, the kernel automatically rounds up non power of two hash sizes to the first correct value.

maxelem value

The maximal number of elements which can be stored in the set, default 65536.

netmask cidr

When the optional netmask parameter specified, network addresses will be stored in the set instead of IP host addresses. The cidr prefix value must be between 1-32 for IPv4 and between 1-128 for IPv6. An IP address will be in the set if the network address, which is resulted by masking the address with the netmask calculated from the prefix, can be found in the set.

For the inet family one can add or delete multiple entries by specifying a range or a network:

ipaddr := { ip | fromaddr-toaddr | ip/cidr }

Examples:

ipset create foo hash:ip netmask 30

ipset add foo 192.168.1.0/24

ipset test foo 192.168.1.2

hash:net

CREATE-OPTIONS := [ family { inet | inet6 } ] | [ hashsize value ] [ maxelem value ] [ timeout value ]

ADD-ENTRY := netaddr

ADD-OPTIONS := [ timeout value ] [ nomatch ]

DEL-ENTRY := netaddr

TEST-ENTRY := netaddr

where netaddr := ip[/cidr]

Optional create options:

family { inet | inet6 }

The protocol family of the IP addresses to be stored in the set. The default is inet, i.e IPv4.

hashsize value

The initial hash size for the set, default is 1024. The hash size must be a power of two, the kernel automatically rounds up non power of two hash sizes to the first correct value.

maxelem value

The maximal number of elements which can be stored in the set, default 65536.

For the inet family one can add or delete multiple entries by specifying a range, which is converted internally to network(s) equal to the range:

netaddr := { ip[/cidr] | fromaddr-toaddr }

When adding/deleting/testing entries, if the cidr prefix parameter is not specified, then the host prefix value is assumed. When adding/deleting entries, the exact element is added/deleted and overlapping elements are not checked by the kernel. When testing entries, if a host address is tested, then the kernel tries to match the host address in the networks added to the set and reports the result accordingly.

From the set netfilter match point of view the searching for a match always starts from the smallest size of netblock (most specific prefix) to the largest one (least specific prefix) added to the set. When adding/deleting IP addresses to the set by the SET netfilter target, it will be added/deleted by the most specific prefix which can be found in the set, or by the host prefix value if the set is empty.

The lookup time grows linearly with the number of the different prefix values added to the set.

Example:

ipset create foo hash:net

ipset add foo 192.168.0.0/24

ipset add foo 10.1.0.0/16

ipset add foo 192.168.0/24

ipset add foo 192.168.0/30 nomatch

When matching the elements in the set above, all IP addresses will match from the networks 192.168.0.0/24, 10.1.0.0/16 and 192.168.0/24 except 192.168.0/30.  

hash:ip,port

CREATE-OPTIONS := [ family { inet | inet6 } ] | [ hashsize value ] [ maxelem value ] [ timeout value ]

ADD-ENTRY := ipaddr,[proto:]port

ADD-OPTIONS := [ timeout value ]

DEL-ENTRY := ipaddr,[proto:]port

TEST-ENTRY := ipaddr,[proto:]port

Optional create options:

family { inet | inet6 }

The protocol family of the IP addresses to be stored in the set. The default is inet, i.e IPv4.

hashsize value

The initial hash size for the set, default is 1024. The hash size must be a power of two, the kernel automatically rounds up non power of two hash sizes to the first correct value

maxelem value

The maximal number of elements which can be stored in the set, default 65536.

For the inet family one can add or delete multiple entries by specifying a range or a network of IPv4 addresses in the IP address part of the entry:

ipaddr := { ip | fromaddr-toaddr | ip/cidr }

The [proto:]port part of the elements may be expressed in the following forms, where the range variations are valid when adding or deleting entries:

portname[-portname]

TCP port or range of ports expressed in TCP portname identifiers from /etc/services

portnumber[-portnumber]

TCP port or range of ports expressed in TCP port numbers

tcp|sctp|udp|udplite:portname|portnumber[-portname|portnumber]

TCP, SCTP, UDP or UDPLITE port or port range expressed in port name(s) or port number(s)

icmp:codename|type/code

ICMP codename or type/code. The supported ICMP codename identifiers can always be listed by the help command.

icmpv6:codename|type/code

ICMPv6 codename or type/code. The supported ICMPv6 codename identifiers can always be listed by the help command.

proto:0

All other protocols, as an identifier from /etc/protocols or number. The pseudo port number must be zero.

The hash:ip,port type of sets require two src/dst parameters of the set match and SET target kernel modules.

Examples:

ipset create foo hash:ip,port

ipset add foo 192.168.1.0/24,80-82

ipset add foo 192.168.1.1,udp:53

ipset add foo 192.168.1.1,vrrp:0

ipset test foo 192.168.1.1,80

hash:net,port

CREATE-OPTIONS := [ family { inet | inet6 } ] | [ hashsize value ] [ maxelem value ] [ timeout value ]

ADD-ENTRY := netaddr,[proto:]port

ADD-OPTIONS := [ timeout value ] [ nomatch ]

DEL-ENTRY := netaddr,[proto:]port

TEST-ENTRY := netaddr,[proto:]port

where netaddr := ip[/cidr]

Optional create options:

family { inet | inet6 }

The protocol family of the IP addresses to be stored in the set. The default is inet, i.e IPv4.

hashsize value

The initial hash size for the set, default is 1024. The hash size must be a power of two, the kernel automatically rounds up non power of two hash sizes to the first correct value.

maxelem value

The maximal number of elements which can be stored in the set, default 65536.

For the netaddr part of the elements see the description at the hash:net set type. For the [proto:]port part of the elements see the description at the hash:ip,port set type.

When adding/deleting/testing entries, if the cidr prefix parameter is not specified, then the host prefix value is assumed. When adding/deleting entries, the exact element is added/deleted and overlapping elements are not checked by the kernel. When testing entries, if a host address is tested, then the kernel tries to match the host address in the networks added to the set and reports the result accordingly.

From the set netfilter match point of view the searching for a match always starts from the smallest size of netblock (most specific prefix) to the largest one (least specific prefix) added to the set. When adding/deleting IP addresses to the set by the SET netfilter target, it will be added/deleted by the most specific prefix which can be found in the set, or by the host prefix value if the set is empty.

The lookup time grows linearly with the number of the different prefix values added to the set.

Examples:

ipset create foo hash:net,port

ipset add foo 192.168.0/24,25

ipset add foo 10.1.0.0/16,80

ipset test foo 192.168.0/24,25

hash:ip,port,ip

CREATE-OPTIONS := [ family { inet | inet6 } ] | [ hashsize value ] [ maxelem value ] [ timeout value ]

ADD-ENTRY := ipaddr,[proto:]port,ip

ADD-OPTIONS := [ timeout value ]

DEL-ENTRY := ipaddr,[proto:]port,ip

TEST-ENTRY := ipaddr,[proto:]port,ip

For the first ipaddr and [proto:]port parts of the elements see the descriptions at the hash:ip,port set type.

Optional create options:

family { inet | inet6 }

The protocol family of the IP addresses to be stored in the set. The default is inet, i.e IPv4.

hashsize value

The initial hash size for the set, default is 1024. The hash size must be a power of two, the kernel automatically rounds up non power of two hash sizes to the first correct value.

maxelem value

The maximal number of elements which can be stored in the set, default 65536.

The hash:ip,port,ip type of sets require three src/dst parameters of the set match and SET target kernel modules.

Examples:

ipset create foo hash:ip,port,ip

ipset add foo 192.168.1.1,80,10.0.0.1

ipset test foo 192.168.1.1,udp:53,10.0.0.1

hash:ip,port,net

CREATE-OPTIONS := [ family { inet | inet6 } ] | [ hashsize value ] [ maxelem value ] [ timeout value ]

ADD-ENTRY := ipaddr,[proto:]port,netaddr

ADD-OPTIONS := [ timeout value ] [ nomatch ]

DEL-ENTRY := ipaddr,[proto:]port,netaddr

TEST-ENTRY := ipaddr,[proto:]port,netaddr

where netaddr := ip[/cidr]

For the ipaddr and [proto:]port parts of the elements see the descriptions at the hash:ip,port set type. For the netaddr part of the elements see the description at the hash:net set type.

Optional create options:

family { inet | inet6 }

The protocol family of the IP addresses to be stored in the set. The default is inet, i.e IPv4.

hashsize value

The initial hash size for the set, default is 1024. The hash size must be a power of two, the kernel automatically rounds up non power of two hash sizes to the first correct value.

maxelem value

The maximal number of elements which can be stored in the set, default 65536.

From the set netfilter match point of view the searching for a match always starts from the smallest size of netblock (most specific cidr) to the largest one (least specific cidr) added to the set. When adding/deleting triples to the set by the SET netfilter target, it will be added/deleted by the most specific cidr which can be found in the set, or by the host cidr value if the set is empty.

The lookup time grows linearly with the number of the different cidr values added to the set.

The hash:ip,port,net type of sets require three src/dst parameters of the set match and SET target kernel modules.

Examples:

ipset create foo hash:ip,port,net

ipset add foo 192.168.1,80,10.0.0/24

ipset add foo 192.168.2,25,10.1.0.0/16

ipset test foo 192.168.1,80.10.0.0/24

hash:net,iface

CREATE-OPTIONS := [ family { inet | inet6 } ] | [ hashsize value ] [ maxelem value ] [ timeout value ]

ADD-ENTRY := netaddr,[physdev:]iface

ADD-OPTIONS := [ timeout value ] [ nomatch ]

DEL-ENTRY := netaddr,[physdev:]iface

TEST-ENTRY := netaddr,[physdev:]iface

where netaddr := ip[/cidr]

Optional create options:

family { inet | inet6 }

The protocol family of the IP addresses to be stored in the set. The default is inet, i.e IPv4.

hashsize value

The initial hash size for the set, default is 1024. The hash size must be a power of two, the kernel automatically rounds up non power of two hash sizes to the first correct value.

maxelem value

The maximal number of elements which can be stored in the set, default 65536.

For the netaddr part of the elements see the description at the hash:net set type.

When adding/deleting/testing entries, if the cidr prefix parameter is not specified, then the host prefix value is assumed. When adding/deleting entries, the exact element is added/deleted and overlapping elements are not checked by the kernel. When testing entries, if a host address is tested, then the kernel tries to match the host address in the networks added to the set and reports the result accordingly.

From the set netfilter match point of view the searching for a match always starts from the smallest size of netblock (most specific prefix) to the largest one (least specific prefix) added to the set. When adding/deleting IP addresses to the set by the SET netfilter target, it will be added/deleted by the most specific prefix which can be found in the set, or by the host prefix value if the set is empty.

The second direction parameter of the set match and SET target modules corresponds to the incoming/outgoing interface : src to the incoming, while dst to the outgoing. When the interface is flagged with physdev:, the interface is interpreted as the incoming/outgoing bridge port.

The lookup time grows linearly with the number of the different prefix values added to the set.

The internal restriction of the hash:net,iface set type is that the same network prefix cannot be stored with more than 64 different interfaces in a single set.

Examples:

ipset create foo hash:net,iface

ipset add foo 192.168.0/24,eth0

ipset add foo 10.1.0.0/16,eth1

ipset test foo 192.168.0/24,eth0

list:set

CREATE-OPTIONS := [ size value ] [ timeout value ]

ADD-ENTRY := setname [ { before | after } setname ]

ADD-OPTIONS := [ timeout value ]

DEL-ENTRY := setname [ { before | after } setname ]

TEST-ENTRY := setname [ { before | after } setname ]

Optional create options:

size value

The size of the list, the default is 8.

By the ipset commad you can add, delete and test set names in a list:set type of set.

By the set match or SET target of netfilter you can test, add or delete entries in the sets added to the list:set type of set. The match will try to find a matching entry in the sets and the target will try to add an entry to the first set to which it can be added. The number of direction options of the match and target are important: sets which require more parameters than specified are skipped, while sets with equal or less parameters are checked, elements added/deleted. For example if a and b are list:set type of sets then in the command

iptables -m set --match-set a src,dst -j SET --add-set b src,dst

the match and target will skip any set in a and b which stores data triples, but will match all sets with single or double data storage in a set and stop matching at the first successful set, and add src to the first single or src,dst to the first double data storage set in b to which the entry can be added. You can imagine a list:set type of set as an ordered union of the set elements.

Please note: by the ipset commad you can add, delete and test the setnames in a list:set type of set, and not the presence of a set's member (such as an IP address).  

GENERAL RESTRICTIONS

COMMENTS

Backward compatibility is maintained and old ipset syntax is still supported.

The iptree and iptreemap set types are removed: if you refer to them, they are automatically replaced by hash:ip type of sets.  

DIAGNOSTICS

BUGS

SEE ALSO

AUTHORS

LAST REMARK

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

COMMANDS

OTHER OPTIONS

SET TYPES

bitmap:ip

bitmap:ip,mac

bitmap:port

hash:ip

hash:net

hash:ip,port

hash:net,port

hash:ip,port,ip

hash:ip,port,net

hash:net,iface

list:set

GENERAL RESTRICTIONS

COMMENTS

DIAGNOSTICS

BUGS

SEE ALSO

AUTHORS

LAST REMARK